Bio pH Control

Only a small amount needs to be added to a spraying liquid to achieve a considerable drop in pH value.

If you have problems with hard water and a high pH in the spraying liquid, Bio pH Control is the solution; it can often reduce the use of plant protection products by 30–50%.

Some plant protection products are very unstable at a pH over 8. That is particularly true in sugar beet products and plant protection products. Others have an optimal pH between 5 and 5.5 or as low 3 and below.

Bio pH Control is the absolute cheapest and most efficient product on the market for lowering the pH in spraying liquids.

At the same time, Bio pH Control ensures that your sprayer is always clean and you will enjoy no longer having problems with clogged nozzles and filters. The sprayer is as clean as a new on the inside.

See recommendations here

Dosage

Laboratory tests have shown via titration that only 0.1 L per 100 L water Bio pH Control is needed – and with very hard water, 0.3 L.

Application

1. Pour the desired amount of water in the sprayer and start mixing
2. Add Bio pH Control in the recommended dose (0.1 L – 0.3 L per 100 L water)
3. Add micronutrients
4. Add plant protection

MIXTURES

Note that we assume no liability for any mixture with other fertilisers or plant protection products. Before mixing, it is advisable to make a small test solution. BioNutria Denmark will not be responsible for the effect of mixtures, and guarantees only the content of Bio pH Control.

Handling and storage

Bio pH Control must be stored in a frost-free environment and out of the reach of children.

When handling, you must wear protective gloves and eyewear.